The BIRNS Kelvin / Joule Suspension Assembly, Model 44F-001, permits suspension of the light from its power cord without strain on the electrical connector. Recommended ordering specification: "The Suspension Assembly, Kelvin/Joule, shall permit the suspension of a BIRNS Kelvin (or BIRNS Joule) underwater light to its power cord without load on the electrical connector. It shall be 15.5" long and constructed of 300-series stainless steel (SS), with a SS adjustable circular clamp attached to two SS 1/16" braided wire ropes with crimped loops. Each leg shall be crimped to a 3/8" SS terminal eye, with the crimp point covered with polyolefin tubing. The Assembly shall include a complete set of mounting hardware suitable to attach the light to the Assembly." New! Hanging weights allow for easier suspension from power cable. The complete set, item 41C-008, includes two weights and all required hardware. The BIRNS Tubelight Suspension Assembly, Model 44F-002, permits suspension of the light from its power cord without strain on the electrical connector. Recommended ordering specification: "The Tubelight Suspension Assembly shall permit the suspension of a BIRNS Tubelight underwater light to its power cord without load on the electrical connector. It shall be 15.5" long and constructed of 300-series stainless steel (SS), with a SS adjustable circular clamp attached to two SS 1/16" braided wire ropes with crimped loops. Each leg shall be crimped to a SS terminal eye, with the crimp point covered with polyolefin tubing. The Assembly shall include a complete set of hardware suitable to attach the light to the Assembly." Top of Page